Pins, Clips and Rivets - Westfield Fasteners Ltd (2024)

Order List Summary
Goods Total
Delivery =

Pins, Clips and Rivets - Westfield Fasteners Ltd (1)

VAT @%
Grand Total

Pins, Clips and Rivets - Westfield Fasteners Ltd (2)

Free Delivery

Pins, Clips and Rivets - Westfield Fasteners Ltd (3) on UK orders of over £40 nett.

Our range of non threaded fasteners includes Dowel Pins, Split Pins, R-Clips, Pop Rivets, Roll Pins, Clevis Pins and Lynch Pins. All designed to be used with pre-drilled or reamed holes to ensure a safe and solid union. R-Clips can be re-used and are easier to fit and remove. Cotter Pins are more usually single use items as they are bent during fitment and removal which weakens the metal.

Roll Pins R Clips Split Pins Blind Rivets
Fastener Material Key
A1 A1 Stainless Steel - Also known as grade 303. A general purpose grade of stainless steel but with better fabrication/machining properties than grade 304.
A2 A2 Stainless Steel - Also known as grade 304 or 18/8. A general purpose grade of stainless steel.
A4 A4 Stainless Steel - Also known as grade 316 or 18/8/3. A higher corrosion resistant, marine grade of stainless steel.
AlumBlk Black Coated Aluminium - Black coated lightweight aluminium, with a steel mandrill.
AlumPln Plain Aluminium - Typically for blind rivets, plain, unpainted lightweight aluminium, with a steel mandrill.
AlumWht White Coated Aluminium - White coated lightweight aluminium, with a steel mandrill.
Copper Copper Alloy - Copper has good corrosion resistance and high tensile strength, allowing it to withstand high-pressure and high temperature conditions. It is a highly ductile and malleable material, enabling copper washers to create tighter seals and withstand vibration better than steel. Copper also provides excellent thermal and electrical conductivity.
SS301 301 Stainless Steel - More elastic stainless steel grade used for springs and parts that require some higher strength.

less...

more...

R-Clips (Euro Pattern) in A2 Stainless Steel

R-Clips (Euro Pattern) in A2 Stainless Steel

R Clips, also known as R Keys, R Pins or Hitch Pins. Often used to secure ends of round shafts such as clevis pins or axles. Re-usable and made from A2 grade stainless steel, they can be viewed as a better option than split pins as they are easier to remove whilst essentially doing the same job.

R Clips, also known as R Keys, R Pins or Hitch Pins. Often used to secure ends of round shafts such as clevis pins or axles. Re-usable and made from A2 grade stainless steel, they can be viewed as a better option than split pins as they are easier to remove whilst essentially doing the same job.

A2

A4

2
2.5
3
4
5
6

Spring R-Clips, Double Ring in A2 Stainless Steel

Spring R-Clips, Double Ring in A2 Stainless Steel

Spring cotter pins, also known as R clips with a double loop. The extra loop gives more flexibility than the regular cotter pin, making them easier to use and adjust. Often used to secure ends of round shafts such as clevis pins or axles. They are re-usable and are easier to remove than split pins. Made from A2 (304) stainless steel, they are suitable for marine and outdoor applications, such as securing canopy frames and other ship deck mounted items. Conforms to DIN 11024.

Spring cotter pins, also known as R clips with a double loop. The extra loop gives more flexibility than the regular cotter pin, making them easier to use and adjust. Often used to secure ends of round shafts such as clevis pins or axles. They are re-usable and are easier to remove than split pins. Made from A2 (304) stainless steel, they are suitable for marine and outdoor applications, such as securing canopy frames and other ship deck mounted items. Conforms to DIN 11024.

A2

A4

2.25
2.80
3.60
4.50
5.60
6.30
7.00

Clevis Pins in A4 Stainless Steel

Clevis Pins in A4 Stainless Steel

Clevis Pins are used to allow rotation between connected parts about the Axis of the pin. Our Clevis Pins are unthreaded and consist of a head section, shanked body and a drilled hole across the shank. Used in conjunction with split pins or cotter pins to fix the Clevis in place. Uses include Agricultural Machinery, Towing, Sailing and Linkages.

Clevis Pins are used to allow rotation between connected parts about the Axis of the pin. Our Clevis Pins are unthreaded and consist of a head section, shanked body and a drilled hole across the shank. Used in conjunction with split pins or cotter pins to fix the Clevis in place. Uses include Agricultural Machinery, Towing, Sailing and Linkages.

A4

Cotter Split Pins (DIN 94) in A2 Stainless Steel

Cotter Split Pins (DIN 94) in A2 Stainless Steel

Cotter Pins, also known as Split Pins are designed to be inserted through a hole and bent to secure in place, they are commonly made from wire which is semi-circular in cross section and square cut at the end, other specialist end finishes include Mitre or Bevel. Lengths are measured from the end of the tines to the point the base of the eyelet hole contacts with the host material. An unthreaded fastener solution for single use, as bending fatigue can cause failure if re-used.

Cotter Pins, also known as Split Pins are designed to be inserted through a hole and bent to secure in place, they are commonly made from wire which is semi-circular in cross section and square cut at the end, other specialist end finishes include Mitre or Bevel. Lengths are measured from the end of the tines to the point the base of the eyelet hole contacts with the host material. An unthreaded fastener solution for single use, as bending fatigue can cause failure if re-used.

A2

A4

1
1.2
1.6
2
2.5
3.2
4
5
6.3
8
10

Cotter Ring in A4 Stainless Steel

Cotter Ring in A4 Stainless Steel

Cotter rings, also known as split cotter rings, kick-out rings and retaining rings. These are made from A4 marine grade stainless steel and are durable and corrosion resistant. Designed for attaching and securing items and for use with clevis pins. They are easily removable and fast to install. Insert the end outside the circle into a hole on the item it's attaching to and wind it on.

Cotter rings, also known as split cotter rings, kick-out rings and retaining rings. These are made from A4 marine grade stainless steel and are durable and corrosion resistant. Designed for attaching and securing items and for use with clevis pins. They are easily removable and fast to install. Insert the end outside the circle into a hole on the item it's attaching to and wind it on.

A4

1.0
1.2
1.5
2.0

Linch Pins in A4 Stainless Steel

Linch Pins in A4 Stainless Steel

Linch pins, also known as lynch pins. Strong and durable A4 stainless steel ring used for mooring ropes and chains, diving gear and saddlery. Also referred to as linch pins with O ring.

Linch pins, also known as lynch pins. Strong and durable A4 stainless steel ring used for mooring ropes and chains, diving gear and saddlery. Also referred to as linch pins with O ring.

A4

4.4
6.0
7.4
10.6

Dowel Pin (DIN 7) in A1 Stainless Steel

Dowel Pin (DIN 7) in A1 Stainless Steel

Our stock of Dowel Pins are short cylindrical sections of metal cut from a Dowel Bar. For use in aligning machinery parts correctly and often as reference points for mechanical engineers to ensure repeatable and accurate assemblies.

Our stock of Dowel Pins are short cylindrical sections of metal cut from a Dowel Bar. For use in aligning machinery parts correctly and often as reference points for mechanical engineers to ensure repeatable and accurate assemblies.

A1

1
1.5
2
2.5
3
4
5
6
8
10
12
16
20

Blind Rivets with Pan or Dome Head to ISO 15983 in A2 Stainless Steel

Blind Rivets with Pan or Dome Head to ISO 15983 in A2 Stainless Steel

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a domed or pan head, and are to the ISO 15983 standard, unless stated otherwise.

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a domed or pan head, and are to the ISO 15983 standard, unless stated otherwise.

A2

3.0
3.2
4.0
4.8
5.0

Blind Rivets with Countersunk Head to ISO 15984 in A2 Stainless Steel

Blind Rivets with Countersunk Head to ISO 15984 in A2 Stainless Steel

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a countersunk head, and are to ISO 15984 standard.

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a countersunk head, and are to ISO 15984 standard.

A2

3
3.2
4
4.8

Blind Rivets with Pan or Dome Head to DIN 7337 in Black Coated Aluminium

Blind Rivets with Pan or Dome Head to DIN 7337 in Black Coated Aluminium

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a domed or pan head, and are to the DIN 7337 standard.

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a domed or pan head, and are to the DIN 7337 standard.

Alum
Blk

Alum
Pln

Alum
Wht

Copper

2.4
3.2
4.0
4.8

Blind Rivets with Countersunk Head to DIN 7337 in Plain Aluminium

Blind Rivets with Countersunk Head to DIN 7337 in Plain Aluminium

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a countersunk head, and are to the DIN 7337 standard.

Blind rivets, also known as pop rivets, are an unthreaded fastener, and can be used when access is only available on one side of the workpiece or joint. These rivets are fitted using one of several types of riveting tool. These items are manufactured in many different types and material combinations. The examples here are the standard open type, with a countersunk head, and are to the DIN 7337 standard.

Alum
Pln

2.4
3.0
3.2
4.0
4.8

Slotted Roll Pins in 301 Stainless Steel

Slotted Roll Pins in 301 Stainless Steel

Slotted roll pins are a heavy duty type of self retaining pin, where the spring steel they are made from allows the pin to sit in tension within the hole that they are fitted into. Slotted roll pins are also known as slotted spring pins, tension pins, split dowel pins and hollow spring pins. Conform to ISO 8752 / DIN 1481.

Slotted roll pins are a heavy duty type of self retaining pin, where the spring steel they are made from allows the pin to sit in tension within the hole that they are fitted into. Slotted roll pins are also known as slotted spring pins, tension pins, split dowel pins and hollow spring pins. Conform to ISO 8752 / DIN 1481.

SS301

1
1.5
2
2.5
3
3.5
4
4.5
5
6
8
10
12

Spiral Roll Pins in 301 Stainless Steel

Spiral Roll Pins in 301 Stainless Steel

Spiral roll pins are similar to the slotted roll pin, but are constructed from a spiral of steel, forming a tube shape. These are stronger than the single coil of the rolled slotted pin, exerting pressure more evenly around it circumference, which helps to absorb vibrations better. These are also known as coiled spring pins and conform to ISO 8750.

Spiral roll pins are similar to the slotted roll pin, but are constructed from a spiral of steel, forming a tube shape. These are stronger than the single coil of the rolled slotted pin, exerting pressure more evenly around it circumference, which helps to absorb vibrations better. These are also known as coiled spring pins and conform to ISO 8750.

SS301

1
1.5
2
2.5
3
4
5
6
8

Top

Pins, Clips and Rivets - Westfield Fasteners Ltd (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Jonah Leffler

Last Updated:

Views: 6726

Rating: 4.4 / 5 (45 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Jonah Leffler

Birthday: 1997-10-27

Address: 8987 Kieth Ports, Luettgenland, CT 54657-9808

Phone: +2611128251586

Job: Mining Supervisor

Hobby: Worldbuilding, Electronics, Amateur radio, Skiing, Cycling, Jogging, Taxidermy

Introduction: My name is Jonah Leffler, I am a determined, faithful, outstanding, inexpensive, cheerful, determined, smiling person who loves writing and wants to share my knowledge and understanding with you.